GL-AR750

GL-AR750

GL-AR750

Overview

The GL-AR750 is a dual-band travel AC router. The simultaneous dual-band supports up to 733Mbps (2.4GHz: 300Mbps + 5GHz: 433Mbps) wireless transmission rate. It can convert a public network to a private Wi-Fi for secure surfing. External storage supports MicroSD up to 128GB. OpenWrt/LEDE and OpenVPN are pre-installed.

Using Uboot to Debrick Your Router

You may brick your router if you were doing some DIY projects or flashed a wrong firmware. You are not able to access your router but you can re-install the firmware by using Uboot failsafe.

Please follow the procedures below to access the Uboot Web UI and re-install the firmware:

  1. Connect Connect only one cable to your router, and leave the other port (LAN or WAN) unconnected.
  2. Press and Hold Press and hold the Reset button firmly first, and then power on your device.
  3. Lights The LEDs will start blinking.
  4. Release Release your finger when you see the LEDs flashing
  5. Set IP Set your computer’s IP address to 192.168.1.2
  6. Enter Web UI User Firefox or Chrome to visit http://192.168.1.1. Then you will enter Uboot Web UI.
  7. Update Click Choose File to find the firmware. Then click Update firmware. You can download the firmware here: http://download.gl-inet.com/firmware/
  8. Upgrading Wait for around 3 minutes. Don’t power-off your device while upgrading. Revert the IP setting you did in step 5 and you will be able to access the router via 192.168.8.1 again.

See https://docs.gl-inet.com/en/2/troubleshooting/debrick/