TNC-X for Raspberry Pi
TNC-Pi is a special version of TNC-X designed to interface directly with the Raspberry Pi computer. It can connect to the Pi either via the Pi's serial port, or via the I2C protocol. In the latter case, a single Pi can support multiple TNC-Pi's at the same time, since each TNC-Pi can be given a unique I2C address.
The firmware for TNC-Pi was based on the original TNC-X open source code by John Hansen, W2FS as modified by John Wiseman, G8BPQ to support the I2C protocol as well as the original serial port connection.
Original Page: http://www.tnc-x.com/TNCPi.htm Shared from Pocket